Turbocharger repair workshop
WE OFFER A READY TO START TURBOCHARGER REPAIR BUSINESS
We produce the entire range of equipment for balancing turbocompressors. We share the experience of two of our own turbine repair services.
We ourselves repair turbines and work on our equipment, so the equipment is adapted for those who work on it. With our equipment, the payback period of your business will be reduced in 2-3 times.
We do not sell the franchise, every client gets what he needs. Be the first in your region
TURBOCOMPRESSORS MARKET SIZE
According to estimates of the American Association of Engineers SAE, the production of turbocompressors in the world grew in 3 times from 2013 to 2016. The company Honeywell, in its forecast, says that by 2020 the turbocompressors market will grow for another 70%. Even proponents of atmospheric engine production such as TOYOTA, HONDA, SUZUKI introduced new turbocompressor engines last year.
During coming years, the number of engines with turbocompressors will also continuously grow because in fact it is the easiest and cheapest way to raise engine power for 10… 20% and reduce fuel consumption for the same percentages.
Regional repair services have the opportunity to see the car from which the turbine (engine) got into repair. The turbine id the dependent unit. It, as a rule, fails for some reason from the outside. If this reason is not eliminated, then it’ll be destroying the turbine further. The vast majority of negative reviews about the repair of turbocompressors are associated not so much with poor-quality repairs, but with the “failure” of the original problems of the car. And the access to the direct owner of the car, the repair service station which serves the car, and the car itself dramatically increases the possibilities for solving the problem as a whole. Statistics indicate that in cities of 300 thousand people this business will be profitable. In cities, with more than 1 million people will from 2 to 5 workshops be able to work comfortably. Moreover, these figures are characteristic of 2014, and with the growth of the market they will grow.
Over the years, we have observed hundreds of companies that have starter turbine repair services. We studied with them in the same way as they with us. Very often we “walked” nearby and recorded both luck and mistakes. We have accumulated vast experience and are ready to share it. Summarizing this experience, we can safely say that all successful companies in this area are very similar to each other. And all unsuccessful are unsuccessful for various reasons.
We can confidently show you a quick and direct path to success in this area. We passed it ourselves.
We ourselves successfully repair turbines using our own equipment, and we ourselves apply the skills that we teach other people.
There are companies on the market that produce – sell balancing machines – but they themselves have never worked on them and do not even guess about their shortcomings. There are companies on the market that sell spare parts to turbines, but often do not know anything about these parts because they have never checked them. They did not check the conformity of spare parts geometric dimensions, did not install them in turbocompressors and do not have experience in repair using these spare parts.
Almost everyone who fixes something has something to learn from. Each of these people, in some way, changes the technology, finds their own technical solutions, they will be with you if you take up this business. However, at the beginning of the journey, there is no point in inventing the “wheel.” It’s invented before you. We will just help you to go the initial path, which we went for several years, in a few months.
We do not sell the franchise and do not “tie” to ourselves forever (although we understand that this would increase our revenues). This is due to the fact that we cooperate with a large number of enterprises in the market, which need only our equipment because they have gone the rest of the way and simply do not need our training, spare parts, etc.
You can only buy what you need from the list below.
We do not impose additional services.
We try to show an individual approach and give everyone what he needs
TURBO-BOOST-TEST TURBOCHARGER TESTING BENCH
The bench is used to check boost characteristics after a repair of a turbocharger with or without vacuum or electronic control.
BALANCING MACHINE FOR TURBOCHARGER CHRA DBST-10
Low-speed balancing of the rotor in the turbocharger center housing rotating assembly, and is also used to check oil leakage the turbocharger after the assembly operation
TURBOCHARGERS CORE BALANCING MACHINE DBST-20
Slow balancing process of turbocompressors’ rotors assembled in the hull
ROTOR BALANCING MACHINE BVI-03-10T
Low-speed balancing process of turbocompressors’ shaft and compressor wheel balancing
ELECTRONIC ACTUATOR TESTER ATP-1000
Diagnostics of actuators (electric valves, DC motors ) and VNT turbochargers also boost control solenoids.
HIGH-SPEED VSR TURBO BALANCING MACHINE SBR-10
High-speed balancing of turbochargers at speeds reaching maximum operational values to eliminate the dynamic deflection of the turbine rotor
VNT TURBO FLOWBENCH GEOMET-2000
Static calibration and testing of VNT turbochargers with vacuum, air and electronic control.
GEOMET-500 STAND FOR CALIBRATING A VARIABLE GEOMETRY TURBOCHARGER
“Geomet-500” is a bench for adjustment of turbochargers with variable geometry: fast-payback equipment that allows to effectively restore turbocharger settings to factory standards after cartridge or actuator replacement.
Open your own turbocharger repair service
Along with the equipment, you will receive training in working skills, as well as technical support for the entire life of the equipment.