TURBOCHARGER TEST BENCH TURBO-SHOP
TURBO-SHOP is the result of many years of experience, embodied in a unique hybrid design that allows to solve complex problems associated with repair and diagnosis of turbochargers of various designs and sizes for small workshops and start-ups.
As a rule, there are several problems at the “start”: firstly, limited working space, secondly, the lack of available resources for the purchase of a large fleet of repair equipment, and thirdly, the lack of opportunities to cover a large sector of the service market.
TURBO-SHOP test bench solves all these problems as it is a combination of modern technologies – it is a multitasking special equipment that takes up less space than your workplace, allowing you to diagnose and repair 85% of common models of turbochargers.
WE PROVIDE A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE
Our company has a technical support service center. If you have any questions, you can contact us for help.
ADVANTAGES AND FEATURES
- Payback time is less than a year.
- Thanks to the stand’s three-level filtration system, you can correct imbalances without the risk of chips getting into the cartridge housing without removing it from the stand, saving you a lot of set-up time. In addition, a good filtration system extends the oil change period, reducing your maintenance costs.
- Inexpensive semi-synthetic oil grades can be used to operate the hydraulic system, making maintenance costs very low.
- Calibration of equipment does not require the presence of outside specialists and is performed within a minute by the stand operator, that is, you do not depend on anyone, save money for the service, your equipment and process works without downtime, so there are no alternative losses. Also do not forget that the stand is always calibrated, which means that errors affecting the quality of work performed are excluded, i.e. the appearance of defects and complaints are minimized.
- The stand is made of high quality available components, i.e. even after 10 years you will have no problems with major repairs.
- Auto-testing function of the stand systems allows you to detect deviations in the equipment operation and localize the malfunction in time, i.e. repair does not require calling a specialist, you save resources and do not waste time.
- When buying the stand you are given more than 3500 test-plans of branded turbochargers and their analogs, that is, from the first day you have the opportunity to work with the world’s largest database without wasting time searching for information, earning money. In addition, you have the opportunity to increase your database independently updating it.
- The peculiarity of the design of the mounting systems of the actuator modules allows you to work with any type of turbocharger (even with the lower oil supply), and the equipment is designed so that you can refine it yourself if necessary or make a new one, that is, you can work with new varieties of turbochargers expanding your capabilities.
YOUR POSSIBILITIES AFTER PURCHASING THE STAND
High-quality diagnostics
- Check of pneumatic and vacuum type actuators (when connected to the ATP-1000 tester stand, additional check of electronically controlled turbocharger drive, diagnostics of electronic actuator and its servomotor);
- Determination of actuator spring wear degree;
- Analysis of the condition of pneumatic and vacuum solenoids being a part of turbocharging systems.
- Determination of the condition of the control valve of the turbocharger system N75;
- Checking the condition of the geometry of the variable turbocharger(VNT);
- Determining the vibration level of the assembled cartridge;
- Finding the source of vibration by harmonic analysis
Balancing
- Elimination of technological unbalance of cartridges of trucks, cars and special vehicles after assembly.
- Quadrupling (from factory tolerance) the residual unbalance of factory cartridges to reduce complaints and improve turbocharger life and reliability.
- Display of balancing information in “real time” allows to solve conflicts with customers and simplifies the analysis of factors affecting the quality of balancing.
Geometry adjustment
- Allows you to replace worn actuators with analogs, fully restoring the factory settings of the turbocharger.
- Adjustment on the stand will eliminate the need to “race” the car around the city and climb under the hood at the risk of getting burned hands, in addition, it reduces the repair time threefold.
- Adjusting the range of motion of the nozzle blades is easy even for a beginner thanks to the intuitive software interface and convenient location of the turbocharger on the stand.
- Adjustment of the nozzle actuation torque by graph analysis allows to solve the problem of turbocharger overblowing or underblowing in less than a minute.
- Monitoring of parameters during the adjustment process gives a complete picture of the condition of the turbocharger after the repair.
Turbocharger tests
- The design features of the stand’s hydraulic power plant allow you to create a heated oil pressure (which is fed into the cartridge to protect parts from overheating) similar to the operating pressure.
- Running-in and checking the quality of the cartridge assembly at safe speeds to reduce your production risks;
- The vibration level is checked at turbocharger shaft speeds of 10,000 – 20,000 rpm. This check ensures that the turbocharger has been rebuilt properly and that there are no hidden defects such as micro cracks in the parts.
- Checking the cartridge for oil leakage after assembly.
- Analysis of performance and correctness of turbocharger operation after rebuilding or its modernization.
- The possibility of printing out reports on the performed adjustment and balancing ensures the absence of unjustified claims about the quality of repair and will reassure any skeptic.
SPECIFICATIONS
VNT flow calibration
| Parameters | Value |
| Required pneumatic system pressure, MPa | 0,6 – 0,8 |
| Maximum vacuum pump capacity, m3/h | 180 |
| Turbocharger database | 6200 |
| Software | Turbo Test |
Oil leak
| Parameters | Value |
| Required pneumatic system pressure, MPa | 0,6 – 0,8 |
| Maximum achievable rotor speed, rpm | 5 000 |
| Rated operating pressure of the lubrication system, MPa | 0,5 |
| Oil tank volume, l | 6 |
Standard scope of supply
TURBO-SHOP VNT flowbench in assembly for tuning the variable geometry of turbochargers – 1 pc.
Set of adapters for installation of turbochargers – 1 set.
Digital indicator for measuring the rod stroke – 1 set.
Adapter kit for installation of all types of turbochargers, including turbochargers with a lower oil supply – 1 set
Operation manual – 1 pc.
LEARN MORE ABOUT OTHER MACHINES IN THE SERIES
The page lists the characteristics of the basic model of the machine. Almost any parameter(diameter, length, weight, etc.) of the machine can be changed on the customer’s request. When ordering the machine, all parameters of the machine will be agreed additionally.
FOR FREE
We will calculate the tolerances for the permissible residual disbalance according to your drawings. Balance correctly!
