Home/
Turbocharger Repair Equipment/
TESTER-PROGRAMMER OF ELECTRONIC ACTUATORS ATP-3000

TESTER-PROGRAMMER OF ELECTRONIC ACTUATORS ATP-3000

The ATP-3000 tester is designed to diagnose actuators (electric valves, DC motors) of VNT turbochargers, as well as boost control solenoids, which is used in pneumatic systems. The tester allows you to check the position sensors of electronic and pneumatic actuators and has the function of checking a 12V DC motor. The ATP-3000 tester can be successfully used in turbocharger repair services, as well as in car services to determine the cause of the turbocharger malfunction.

WE PROVIDE A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE

Our company has a technical support service center. If you have any questions, you can contact us for help.

BENEFITS AND FEATURES

– there are functions in our tester , which are not available in devices from other manufacturers!

Functions

Testing

Checking electronic turbocharger actuators.
Testing of 12V DC motors up to 2A.
Check supercharger solenoids used in pneumatic systems.
Check position sensors of electronic and pneumatic actuators according to the protocol:
- PWM
- ADC
- SENT

Programming

Programming (adaptation) of electronic HELLA REA actuators:
- Saving the actuator firmware file in the instrument memory (up to 99 pcs.).
- Saving the actuator firmware files on a PC (no restrictions).
- Loading firmware from the PC into the actuator with the instrument. device.
- It is possible to copy settings between between actuators.
Programming (adaptation) of electronic SIEMENS actuators

Helper functions

Protection of the device by current 2A for 3 seconds
Automatic detection of DC motor polarity inside the actuator
Hint to match cable color coding to selected actuator type
Display position sensor readings as a percentage
Display of additional parameters of HELLA programmable actuators
- Firmware number.
- The value of the programmed angles.

Communication protocols:
- PWM
- CAN
- ADC
- SENT
Programming actuator angles HELLA REA

USB Control of drives, when working together with software “GEOMET-2000”, “GEOMET-1000”

SUPPORT AND TRAINING ARE FREE

Our company has the service center for technical support.
In case of any questions you can contact us for help.

Balancing assistance

We are ready to support you in any balancing issues your workpieces

Personnel training

We train personnel in the operation and maintenance of the machines.

Warranty & Service

Our service engineers are ready to provide you with professional assistance

EXPLORE THE FOLLOWING MACHINES:

TURBO-BOOST-TEST TURBOCHARGER TESTING BENCH

The bench is used to check boost characteristics after a repair of a turbocharger with or without vacuum or electronic control.

ELECTRONIC ACTUATOR TESTER ATP-1000

Diagnostics of actuators (electric valves, DC motors ) and VNT turbochargers also boost control solenoids.

GEOMET-500 STAND FOR CALIBRATING A VARIABLE GEOMETRY TURBOCHARGER

"Geomet-500" is a bench for adjustment of turbochargers with variable geometry: fast-payback equipment that allows to effectively restore turbocharger settings to factory standards after cartridge or actuator replacement.

Flow test bench for turbochargers GEOMET-2000

Static calibration and testing of VNT turbochargers with vacuum, air and electronic control.

The page lists the characteristics of the basic model of the machine. Almost any parameter(diameter, length, weight, etc.) of the machine can be changed on the customer’s request. When ordering the machine, all parameters of the machine will be agreed additionally.