ELECTRONIC ACTUATOR TESTER ATP-5000
The ATP-5000 tester is designed for diagnostics of 24/12V car and truck turbocharger actuators. It supports testing of actuators of most manufacturers, programming of HELLA and SIEMENS actuators and calibration of HOLSET actuators.
The tester is used when calibrating variable turbocharger geometry on GEOMET stands.
The ATP-5000 tester can be successfully used in turbocharger repair services, as well as in automotive workshops when reinstalling or replacing the actuator on a turbocharger.
- HELLA
- MAHLE
- SIEMENS
- HITACHI
- DENSO
- MITSUBISHI
- SONCEBOZ
- Torque Motor
- BorgWarner
- Honeywell
- Holset
- Holset US
- Mitsubishi
- Isuzu
- Iveco
- Hino (Mitsubishi)
- Hino (Jideco)
- John Deere (Delphi)
- John Deere (BorgWarner)
- Mercedes (BorgWarner)
- Deutz-Fahr (BorgWarner)
- JCB (BorgWarner)
- New Holland (Jideco)
- Tata
WE PROVIDE A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE
Our company has a technical support service center. If you have any questions, you can contact us for help.
BENEFITS AND FEATURES
● New – functions that are not available in the devices of other manufacturers!
Diagnostics of passenger car actuators
Testing
- Checking electronic turbocharger actuators.
- Testing of 12V DC motors up to 2A.
- Check supercharger solenoids used in pneumatic systems.
- Check position sensors of electronic and pneumatic actuators according to the protocol:
- PWM
- ADC
- SENT
Programming
- Programming (adaptation) of electronic HELLA REA actuators:
- Saving the actuator firmware file in the instrument memory (up to 99 pcs.).
- Saving the actuator firmware files on a PC (no restrictions).
- Loading firmware from the PC into the actuator with the instrument. device.
- It is possible to copy settings between between actuators.
- Programming (adaptation) of electronic SIEMENS actuators
Truck actuator diagnostics
Testing
Diagnostics of the operation of actuators of most manufacturers. It has a mode of manual or automatic setting of the actuator position. Manual in the range from 5% to 95%, automatic from 10% to 90%. To test actuators with 12V supply voltage, the cable must be connected via a 24/12V converter.
Functions Reset, Instal, Calibrate
Carrying out diagnostics of Holset actuators operation. This sequence of functions should be performed after installing (replacing) an actuator on a turbocharger or after the variable geometry range of motion needs to be adjusted. Allows correct mounting of the actuator to the turbine and setting the correct range of lever movement.
Auxiliary functions
- 2A current protection within 3sec.
- Prompts you to match the cable marking to the selected actuator type
- Display of position sensor readings in percentages.
- USB Actuator control when working in conjunction with GEOMET software
Сables SET
For passenger cars
Set of diagnostic cables for actuators and position sensors 18 pcs.
Set of additional diagnostic cables for non-standard turbines 12 pcs.
For trucks
LEARN MORE ABOUT OTHER MACHINES IN THE SERIES
The page lists the characteristics of the basic model of the machine. Almost any parameter(diameter, length, weight, etc.) of the machine can be changed on the customer’s request. When ordering the machine, all parameters of the machine will be agreed additionally.
