ELECTRONIC ACTUATOR TESTER ATP-2000
The ATP-2000 tester is designed for diagnostics of truck turbocharger actuators with 24/12V supply voltage.
The tester allows testing of actuators of most manufacturers, as well as calibration for Holset actuators.
The tester is used for calibration of variable turbocharger geometry on GEOMET stands
The ATP-2000 tester can be successfully used in turbocharger repair services, as well as in automotive workshops when reinstalling or replacing the actuator on the turbocharger.
Available actuators
- Holset
- Holset US
- Mitsubishi
- Isuzu
- Iveco
- Hino (Mitsubishi)
- Hino (Jideco)
- John Deere (Delphi)
- John Deere (BorgWarner)
- Mercedes (BorgWarner)
- Deutz-Fahr (BorgWarner)
- JCB (BorgWarner)
- New Holland (Jideco)
- Tata
WE PROVIDE A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE
Our company has a technical support service center. If you have any questions, you can contact us for help.
BENEFITS AND FEATURES
● New – functions that are not available in the devices of other manufacturers!
Test function
Diagnostics of the operation of actuators of most manufacturers. It has a mode of manual or automatic setting of the actuator position. Manual in the range from 5% to 95%, automatic from 10% to 90%. To test actuators with 12 V supply voltage it is necessary to connect the cable through a 24/12V converter.
Functions Reset, Instal, Calibrate
Carrying out diagnostics of Holset actuators operation. This sequence of functions should be performed after installation (replacement) of the actuator on the turbocharger or after the need to correct the range of motion of the variable geometry. It allows correct mounting of the actuator to the turbine and setting the correct range of motion of the lever.
Auxiliary functions
- 2A current protection within 3sec.
- Prompts you to match the cable label to the selected type of actuator
- Percentage display of position sensor readings.
- USB Actuator control in conjunction with GEOMET software
Сables for diagnostics
Set of diagnostic cables for actuators 14 pcs.
LEARN MORE ABOUT OTHER MACHINES IN THE SERIES
The page lists the characteristics of the basic model of the machine. Almost any parameter(diameter, length, weight, etc.) of the machine can be changed on the customer’s request. When ordering the machine, all parameters of the machine will be agreed additionally.
