CLUTCH COMPONENTS BALANCING MACHINE BVI-03-80
The machine is designed for balancing clutches of undercarriage generators type EGV-08-U1. Reliability and productivity in the conditions of serial production and repair shops of railway depots
Design features
The machine spindle is designed as a full-fledged assembly of a collapsible design, which greatly simplifies its maintenance. Asynchronous frequency-controlled electric drive allows you to perform stepless speed control without stopping the electric motor, the choice of optimal modes for balancing, as well as perform the rotation of the rotor. The spindle is fixed by an electromagnetic clutch in the required angular position for the convenience of unbalance correction.
Easy to operate and reliable balancing system PB-02M, which works stably in difficult production conditions, performs a measurement cycle of one correction plane. Interchangeable balancing mandrels developed by our specialists allow you to re-equip the machine for rotors with different mounting holes quickly and conveniently. SKF bearings used in the spindle can be replaced during operation in a short time.
BALANCING SYSTEM AND CONTROL
We make balancing easier – the main advantage characterizing our balancing systems.
- Ease of use and simple operation do not require special theoretical knowledge from the operator.
- Displays the balancing process in real time and monitors the unbalance behavior of the rotor on the screen to achieve the best possible result.
- The maximum sensitivity of the machine at any moment of operation, set-up and calibration of the machine is carried out by the operator himself.
- Free from the influence of external vibration factors on the measuring result, has a high degree of protection against various types of disturbance.
- World-leading functionality and accuracy due to 40 years of industry development and application experience.
| Options | BVI-03-80 |
|---|---|
| The largest mass of balanced rotors, kg | 100 |
| The largest overall dimensions of balanced rotors: | |
| – diameter, mm | 560 |
| – height, mm | 250 |
| Rotor speed during balancing min -1 | 400-1200 |
| Machine accuracy class according to the State standard 20076-89 | “N” |
| Connecting spindle dimensions | К40 (7:24) |
| Overall dimensions, mm | 1700х890х1350 |
| Machine weight, kg | 250 |
| Measuring system type | single-plane special |
WE PROVIDE A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE
Our company has a technical support service center. If you have any questions, you can contact us for help.
FOR FREE
We will calculate the tolerances for the permissible residual disbalance according to your drawings. Balance correctly!
