GAS METER ROTOR BALANCING MACHINE BVI-03-23

bvi-03-23
bvi-03-23

Design features

high measurement accuracy – specific residual imbalance is not more than 0.4 gmm/kg. The installed frequency converter with vector control allows for smooth regulation of the rotational speed of the balanced part. Equipped with a digital graphic balancing device PB-02M with a graphical indicator. The design of the machine allows you to eliminate the imbalance without removing the part from the machine.

BALANCING SYSTEM AND CONTROL

We make balancing easier – the main advantage characterizing our balancing systems.

  • Ease of use and simple operation do not require special theoretical knowledge from the operator.
  • Displays the balancing process in real time and monitors the unbalance behavior of the rotor on the screen to achieve the best possible result.
  • The maximum sensitivity of the machine at any moment of operation, set-up and calibration of the machine is carried out by the operator himself.
  • Free from the influence of external vibration factors on the measuring result, has a high degree of protection against various types of disturbance.
  • World-leading functionality and accuracy due to 40 years of industry development and application experience.
ptionsBVI-03-23
Mass range of balanced rotors, kgfrom 0,05 to 5
The largest diameter of the balanced rotor, mm200
Distance between supports, mm30-450
The largest diameter of the rotor pins, mm30
Range of diameters of the drive neck of the rotor, mm3-30
Balanced rotor speed, min-1600-5000
Minimum achievable residual specific imbalance, gmm/kg0,4
Machine dimensions, mm700х500х450
Machine weight, kg30
Measuring system type (optional)PB-02M with graphic indicator.

 

WE PROVIDE A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE

Our company has a technical support service center. If you have any questions, you can contact us for help.


    Get a Quote


    Leave a request, our manager will contact you to clarify the details for a commercial quote.

    FOR FREE
    We will calculate the tolerances for the permissible residual disbalance according to your drawings. Balance correctly!
    callback