HEAVY-DUTY INDUSTRIAL DRIVE SHAFT BALANCING MACHINE 97VK1000
Design features
Universal cam clamp adapter with manual clamping – attachment 93% of flanges in seconds. The tapered connection of the spindle and adapters minimizes the installation error of the cardan. The presence of a spindle lock for ease of installation of the shaft.
BALANCING SYSTEM AND CONTROL
We make balancing easier – the main advantage characterizing our balancing systems.
- Ease of use and simple operation do not require special theoretical knowledge from the operator.
- Displays the balancing process in real time and monitors the unbalance behavior of the rotor on the screen to achieve the best possible result.
- The maximum sensitivity of the machine at any moment of operation, set-up and calibration of the machine is carried out by the operator himself.
- Free from the influence of external vibration factors on the measuring result, has a high degree of protection against various types of disturbance.
- World-leading functionality and accuracy due to 40 years of industry development and application experience.
| Options | 97VK1000 |
|---|---|
| Machine type | pre-resonant |
| Mass range of balanced rotors, kg | 50 … 1000 |
| Maximum pipe diameter, mm | 300 |
| Maximum length of cardan shaft, mm | 2500* |
| Number of supports | 2 |
| Number of simultaneously measured planes | 1, 2 |
| Rotor speed range, rpm | 400 … 1500 |
| Minimum achievable residual specific imbalance, gmm/kg, not less than | 10 |
| Machine weight, kg (no more) | 985 |
| Type of supply current | ~ 3-phase |
| Current frequency, Hz | 50 ± 1 |
| Mains voltage, V | 380 ± 10% |
| Motor power of the part rotation drive, not less than, kW | 11,0 |
| Machine balancing system | PB-02M |
Additional equipment
Sectional protective guard of the cardan shaft, for protection against probable ejection, when the shaft rotates, poorly fixed corrective weights, lubrication from bearings, etc. The guard is equipped with a blocking for turning on the rotation of the spindle when the guard is not closed. Welding tongs in the amount of 1 or 2 pcs.
WE PROVIDE A COMPLETE SOLUTION, SUPPORT AND TRAINING WHEN YOU PURCHASE
Our company has a technical support service center. If you have any questions, you can contact us for help.
FOR FREE
We will calculate the tolerances for the permissible residual disbalance according to your drawings. Balance correctly!
